12
step 06:
Do not completely tighten screws until all screws are in place.
1. Attach the corner inclined tube (C) to U-shaped part 1 (G), secure with M6*30mm bolt with washer (P) and nut (R) using allen wrench (T) and wrench (U).
2. Attach the middle inclined tube (D) to U-shaped part 2 (H), secure with M6*30mm bolt with washer (P) and nut (R) using allen wrench (T) and wrench (U).
3. Repeat above steps until the 4 corner inclined tubes (C) are secured to the U-shaped part 1 (G), and the 4 middle inclined tubes (D) are secured to the U-shaped
part 2 (H).
1.
2.
C
C
C
C
C
D
D
D
D
P
P
G
R
R
H
(Part P)×8
(Part R)×8
M6*30mm bolt with washer
nut
(Part U)×1
wrench
(Part T)×1
allen wrench
