26
TARGET FEED MASTER RF
TARGET FEED MASTER RF rev.09
5.3.3.4 History of Added Feed
This menu gives an history of the feed that has been added to each
bin. The last 21 fillings are kept in memory.
Select the "
3. Bin Information
" from
the main menu using the up and down-
arrow keys (or simply press the
corresponding short-cut key).
Select the desired bin using the up and
down-arrow keys. Press the right-ar-
row key.
Press the down-arrow key to select
the "
2. History
" menu. Press the right-
arrow key.
Press the down-arrow key once to
select the "
2. Feed Added
" menu.
Press the right-arrow key. The added
feed history is. Press the down-arrow
key to scroll the display.
To clear this history, simultaneously
press and hold the + & - keys for a 3
second delay.
Feed Weigher for
Breeders VX.X
3. Bin Information
3.1.2 Bin #1 History
2. Feed Added
Bin 1 Feed Added
200X/01/01 12:00 1
Weight 1500 kg
3.1. Bin 1 Info
2. History
47
TARGET FEED MASTER RF
TARGET FEED MASTER RF rev.09
Mix each batch:
Enable this function for ingredients to be weighed individually within
a batch; disable it for ingredients to be weighed together (see ex-
ample below).
This option is only accessible if blends are used, if a scale with valve is
enabled above, and if no mixer is used. This weighing method is automati-
cally performed if your scale does not have a valve.
Example:
100 kg of feed must be delivered and the blend is
composed of 30% from bin 1 and 70% from bin 2:
Mix each batch - disabled:
30 kg of bin 1 is weighed in the scale and is then dumped
in the receiving hopper. The second ingredient (70kg of
bin 2) then starts being weighed.
Mix each batch - enabled:
(with a Max Batch Size of 20kg) :
6 kg of bin 1 (which is 30% of 20 kg) is weighed fol-
lowed by 14 kg of bin 2 (which is 70% of 20kg). These
weighings are repeated until the total amount of feed
(100kg) is reached.
Dump Separately
If you are using a scale with valve, select "Yes" for ingredients to
be weighed individually in the scale before being dumped in the
receiving hopper; select "No" for ingredients to be combined in the
scale before the dump (if you are using a scale without valve,
ingredients are automatically combined in the receiving hopper).
Accessible if a scale with valve is enabled.
Substitution:
This function allows to substitute a blend for another
on preset days of the week (s. 5.5.1).
Time of reset:
Set the time at which the histories are updated.
The bird age is also increased by one day at that time.
Shut off Augers on a Run Time Alarm?
When this function is
enabled, all augers stop when a run time alarm occurs. This type
of alarm occurs when a bin run time has exceeded it maximum
allowed running time, which means that a bin is empty.
