54
TARGET FEED MASTER rev.09
8. INSTALLATION REPORT
CLIENT
Name:
__________________________________________
Address:
__________________________________________
__________________________________________
__________________________________________
City:
__________________________________________
Phone:
__________________________________________
Fax:
__________________________________________
E-mail:
__________________________________________
INSTALLER
Name:
__________________________________________
Address:
__________________________________________
__________________________________________
__________________________________________
City:
__________________________________________
Phone:
__________________________________________
Fax:
__________________________________________
E-mail:
__________________________________________
11
TARGET FEED MASTER
TARGET FEED MASTER rev.09
Use feed
blends?
1. The output auger stops;
2. Feed is delivered into the scale up until the
required feed weight is reached:
- Required weight for a scale with valve = Blend Size
- Required weight for a scale without valve = Max Batch.
Feed also stop being delivered if the max prox switch is
reached.
3. The output auger starts running.
The output auger
operates continuously;
The bin auger stops
when the proximity
sensor detects feed;
its operation is resumed
when the minimum
proxy switch (if used) or
if the maximum proxy
switch does not detect
feed anymore.
Timed or
Continuous
Feeding ?
Feed starts being sent in house 1
when the first clock output is
activated; it starts being sent in
house 2 when the second clock
output is activated.
The feed
constantly
distributed in the
house(s).
Clock output status ?
(On / Off)
The bin augers
are stopped
Off
On
Scale with
valve ?
Yes
with blends
No
Without blends
Presence of a minimum prox.
switch at the bottom of the
receiving hopper ?
The output auger operates up until
no feed is detected by the minimum
proxy. switch. The weighing process
is resumed afterwards.
The output auger operates during
the "Delivery Time". The weighing
process is resumed afterwards.
Timed
Continuous
Yes
No
FIGURE 3: FEED DISTRIBUTION PROCESS
(s.5.6)
(s.5.8.2)
(s.5.5 & 5.8.3)
(s. 5.8.3)
(s.5.8.2)
