22
TARGET FEED MASTER
TARGET FEED MASTER rev.09
Max:
set the maximum allowable amount of feed that can be distrib-
uted per bird or per hundred birds on a daily base.
Accessible if the max feed limit is enabled in the installation (sec. 5.8.2).
Total:
shows the total feed consumption per bird or per hundred birds
since the beginning of the flock.
FEED CONSUMPTION IN THE FLOCK
Today:
Shows the flock's feed consumption
for the current day.
Total:
Shows the total feed consumption
since the beginning of the flock.
Correction:
The user can manually adjust the feed consumption. This is useful to
post up the amount of feed that is distributed manually.
Consumption / flock
Today
500 kg
Total:
6089 kg
Correct.:
0 kg
43
TARGET FEED MASTER
TARGET FEED MASTER rev.09
5.8.4.1 Assigning ID numbers to TRB Modules
This procedure shows how to post the relay boxes' identification number
in the controller so that the controller can communicate with the relay
modules.
Select "
9. Installation
" from the main menu using the up and down-
arrow keys. Press the right-arrow key.
Accessible from the installer mode only (s. 5.8.1).
Select the
"3. Relay Assignment"
menu then press the right-arrow key.
Select the "
6. ID Assignment
" menu
then press the right-arrow key. The ID
numbers are displayed. Select the
relays associated with each ID# as
follows:
"1-8"
: The ID# is associated with a TRB-8 module.
"1-16"
: The ID # is associated with a TRB-16 module
or is associated to relays 1-16 of a TRB-32 module.
"17-32"
the ID# is associated with relays 17 to 32 of a TRB-32 module.
"None"
if the ID# is not associated with any relay. Select "None" for
each unused ID#.
Module ID Assignment
ID#3 use relay1-8
ID#4 use relay1-16
ID#5 use relay17-32
9.3 Relay Assign.
6. ID Assignment
