56
TARGET FEED MASTER
TARGET FEED MASTER rev.09
BIN AUGER 1
OUTPUT AUGER 2
BIN AUGER 2
BIN AUGER 3
BIN AUGER 4
BIN AUGER 5
BIN AUGER 6
OUTPUT AUGER 1
TIME CLOCK 1
TIME CLOCK 2
TIME CLOCK 3
TIME CLOCK 4
TIME CLOCK 5
TIME CLOCK 6
TIME CLOCK 7
TIME CLOCK 8
MIXER 1
MIXER 2
SCALE VALVE 2
RELAY SETTINGS (SEC.5.8.4)
RELAY MODULE
ID # (3-5)
RELAY NUMBER
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
3
4
5
2
3
4
5
6
7
8
1
LOC
LOC
3
4
5
2
3
4
5
6
7
8
1
9
TARGET FEED MASTER rev.09
4. CONTROLLER'S OPERATION
4.1 DESCRIPTION OF THE CONTROLLER
The
TARGET FEED MASTER controller is an electronic device which takes
in charge the whole process of food distribution for broilers in 2 separate
houses. The controller ensures a continuous feed distribution and allows to
monitor the exact quantity of feed consumed by the birds. The user can
also monitor the amount of feed remaining in each bin.
4.2 HOW TO USE THE FEED SCALE CONTROLLER
The
TARGET FEED MASTER controller has been designed with the user in
mind. Thus, great care has been put into making the user interface as
easy to understand as possible. The following paragraphs explain the way
the parameters are organized and how to adjust them.
There are 2 types of values which may be seen on the display (Fig.1, Item
B): Readings and Parameters.
A
Reading
is a value which may not be changed by the user.
A
Parameter
is a value which may be changed by the user.
When a value on the display flashes, this means that it is a
parameter which may be adjusted by the user.
If the value does not flash, it is a reading, or a parameter which
is locked.
4.3 CHANGING PARAMETER VALUES
To change the value of a parameter, simply use the adjustment buttons
(Fig.1, Item D). Use the + / - buttons to increase or to decrease the value
of a parameter.
