6
TARGET FEED MASTER
TARGET FEED MASTER rev.09
1.2 LIST OF SYMBOLS
Warning. Read the following text carefully; it contains
important information which, if ignored, may cause the
controller to operate improperly.
High Voltage. Hazard of electrical shock. Read the
message and follow the instructions carefully.
Pay attention. The following text contains very useful
information.
Double insulation.
Both direct and alternating current
(AC/DC).
Direct current (DC).
Alternating current (AC).
Earth Ground Terminal
Primarily used for functional earth terminals which are
generally associated with test and measurement cir-
cuits. These terminals are not for safety earthing
purposes but provide an earth reference point.
59
TARGET FEED MASTER
TARGET FEED MASTER rev.09
6. Use the up- and down-arrow keys to select the proper type of transfer:
MEMORY CARD
CONTROLLER:
To transfer the memory card's con-
tent into the controller, select the
"Mem.Card
Ctrl"
.
Once it is se-
lected, simultaneously press the
+and - buttons to start the trans-
fer.
CONTROLLER
MEMORY CARD:
To save the controller's configuration
into the memory card, select the
"Ctrl
Mem.Card "
menu. Once
it is selected, simultaneously press
+and - buttons to start the transfer.
7. Once the transfer is over, simulta-
neously press and hold the up- and
down-arrow keys for 5 seconds to exit
the transfer menu, then remove the
memory card from the connector as fol-
lows:
- Turn off power to the controller;
- Open the controller's cover;
- Remove the card from the connector;
- Close the cover then reapply power to
the controller.
8. Lock the card’s switch ( ) if required.
Ctrl > Mem. Card
+/- to start
Mem.Card > Ctrl
+/- to start
IMPORTANT:
REMOVE THE
MEMORY CARD
FROM THE
CONNECTOR WHEN
THE TRANSFER
IS OVER!
TRANSFER ERROR
The controller will not warn you if the transfer is incorrect.
Respect the following rules to make sure the transfer works properly:
•
Make sure the card switch is at the unlocked position before
transferring a configuration on the card.
•
Do not move or hold the card while a transfer is ongoing.