Target MC18, Operating Instructions And Parts List Manual

11

SAFETY FIRST!

WARNINGS

DO’s and DO NOT’s

WARNING:

 FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING

INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.

    DO NOT

DO NOT

operate this machine unless you have read and understood this operator’s manual.

DO NOT

operate this machine without the blade guard, or other protective guards in place.

DO NOT

stand behind or in front of the blade path while the engine/motor is running.

DO NOT

leave this machine unattended while the engine/motor is running.

DO NOT

work on this machine while the engine/motor is running.

DO NOT

operate this machine when you are tired or fatigued.

DO NOT

use a wet blade without adequate water supply to the blade.

DO NOT

exceed maximum blade speed shown for each blade size.  Excessive speed could result in blade breakage.

DO NOT

operate the machine if you are uncertain of how to run the machine.

DO NOT

use damaged equipment or blades.

DO NOT

touch or try to stop a moving blade with your hand.

DO NOT

cock, jam, wedge or twist the blade in a cut.

DO NOT

transport a cutting machine with the blade mounted on the machine.

DO NOT

use a blade that has been dropped or damaged.

DO NOT

use carbide tipped blades.

DO NOT

touch a dry cutting diamond blade immediately after use. These blades require several minutes to cool after each cut.

DO NOT

use damaged or worn blade flanges.

DO NOT

allow other persons to be near the machine when starting, refueling, or when the machine is in operation.

DO NOT

operate this machine in an enclosed area unless it is properly vented.

DO NOT

operate this machine in the vicinity of anything that is flammable. Sparks could cause a fire or an explosion.

DO NOT

allow blade exposure from the guard to be more than 180 degrees.

DO NOT

operate this machine with the belt guard or blade guard removed.

DO NOT

operate this machine unless you are specifically trained to do so.

DO NOT

use a blade that has been over heated. (Core has a bluish color.)

DO NOT

jam material into the blade.

DO NOT

grind on the side of the blade.

DO NOT

lay power cords in or near the water.

DO NOT

tow this machine behind a vehicle.

DO NOT

replace the motor with any motor that does not have a special grounding connection.

DO NOT

operate this machine while under the influence of drugs or alcohol.

*****************

This saw was designed for certain applications only.  DO NOT modify this saw or use for any application other than for
which it was designed. If you have any questions relative to its application, DO NOT use the saw until you have written
Diamant Boart, Inc. and we have advised you.

Diamant Boart, Inc.

17400 West 119th Street

Olathe, Kansas  66061

USA