step 02:
(Part D)×4
M6*15mm bolt with washer
(Part E)×1
allen wrench
Do not completely tighten screws until all screws are in place.
1. Attach the shelf (C) to the table leg (B) by lining up the bolt holes on the
table leg (B) with the corresponding bolt holes on the shelf (C).
2. Secure with M6*15mm bolt with washer (D) using allen wrench (E).
3. Repeat above step until the 4 table legs (B) are secured to the shelf (C).
8
D
C
B
