10
step 4: attach right side panel.
(H1)
x 6
wooden dowel
(H2)
x 5
cam bolt
(H3)
x 5
cam
(H16)
x 1
flat head wrench
4.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
4.2. Screw-In cam bolts must be screwed down flush.
4.3. Refer to page 6 for instructions on how to use the cam lock system.
4.4. Do not over tighten bolts.
4.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
4.2. Screw-In cam bolts must be screwed down flush.
4.3. Refer to page 6 for instructions on how to use the cam lock system.
