7
step 1: attach top panel and back panel.
(H1)
x 2
wooden dowel
(H2)
x 2
cam bolt
(H3)
x 2
cam
1.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
1.2. Screw-In cam bolts must be screwed down flush.
1.3. Refer to page 6 for instructions on how to use the cam lock system.
1.4. Do not over tighten bolts.
1.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
