ADJUSTMENT
The Bulletto
and Bulletto mini
fixture has
a wide range of motion to aim practically
anywhere from where it mounted
.
The
fixture has a 360 degree rotational
freedom and a 180 degree pivotal range
of motion. To change the rotational
angle, unlock the lock nut that holds the
fixture to the mounting bracket and
adjust the rotation to the desired setting.
Once adjusted, secure the lock ring back
to hold the fixture in place and tighten to
secure.
To adjust the pivot angle of the fixture,
use a 3mm hex Allen key (supplied by
installer) to loosen the lock screw. This
will allow the fixture to move freely to
position. Once the fixture is adjusted,
use the same Allen key to lock the
position in place.
Mounting
In
stallation
Targetti USA - A Targetti Group Company - 750-A W 17th St. Costa Mesa, CA 92627 - Phone (714) 513-1991
-
Email:targettiusa@targetti.com - www.targetti.us -
04.10.20 - Page 6 of 9
360°
360°
Lock
3mm
90
°
90
°
24
