Targus AEM105, User Manual

4

5

A

E

F

H

G

B

C
D

A. Bluetooth
B. 
C. Volume-
D. Mic
E. Call
F.  Power LED
G. Power
H.  USB-C Port

Function key

Operating Instructions

Power ON

Operation

Press and hold power button for 2 seconds.

Description Press and hold power button for 2 seconds to turn on the speakerphone.
Note

When the speakerphone is on the LED near the power button and the volume –  and will be white. The 

Bluetooth LED will flash red and green while in pairing mode and stay green once paired. The microphone LED 

will be green.

Power OFF

Operation

Press and hold for 2 seconds.

Description Press and hold power button for 2 seconds to turn off the speakerphone.

Bluetooth pairing

Operation

The speakerphone will automatically enter Bluetooth pairing mode when powered on. You can also manually 

enter Bluetooth pairing mode by pressing and holding the Bluetooth LED for 2 seconds.

Description The Bluetooth LED will flash red and green while in pairing mode along with the voice prompt “ready to pair”. The 

speakerphone will automatically reconnect to previously paired devices within range. If not previously paired, 

activate pairing in the Bluetooth menu of your device and select TARGUS AEM105.
When devices are disconnected manually or out of range the speakerphone it will automatically enter pairing mode 

along with the voice prompt “ready to pair”. If a new connection is not successful after 1 minute the speakerphone 

will go into standby mode. After 5 minutes in standby mode the speakerphone will automatically turn OFF if there 

is still no connection.

Note

The Bluetooth LED will flash red and green while in pairing mode and stay green once paired.

Wired connection and charging

Operation

Connect the USB cable to your device or charger.

Description Connect the USB cable to your device to enable the optional wired connection. Connecting the USB cable to a 

charger or device will also charge the speakerphone.