6
Mobile Port Station
LED Status Indicator Lights
Once all device drivers are installed, the LED status indicator
lights glow and you can connect devices to the port station.
• Hub Link light glows green.
• Tx/Rx light flashes green when data is transmitted to or from
the network.
• 100M light glows green when connected to a 100 Mbps hub.
NOTES: The port station supports hot swapping of the
network cable.
• Serial light glows green.
• USB lights glow green.
Installing Additional Drivers for
New Devices
When connecting new devices to the port station, you may
need to install additional software drivers. Consider the
following guidelines:
• If your computer is running the Windows
®
98 operating
system, a series of screens appear, beginning with the Add
New Hardware Wizard, to guide you through the installation
process.
• If your computer is running the Windows
®
Me/2000/XP
operating system, the drivers install automatically.
• To properly install additional hardware drivers, you must run
the Setup or Install program for that device.