9
Mobile Port Station
4 In the Printer Properties window, select
Details
or
Connection for the Printer
. (Section titles vary, so check
your printer’s user manual for specific instructions.)
5 Change the setting to either LPT2 or USB001 to redirect
printing to the port station.
Connecting to a Local Area Network
To connect an RJ-45 ethernet cable, attach the cable connector
to the ethernet port on the port station. Additional procedures
to connect to an actual network depend on the type of network
you are using. Contact your network administrator for detailed
instructions.
Connecting a USB Device
To connect a USB device, plug it into a USB port on the port
station and follow the additional instructions provided with the
device.
Things to Remember
Using a Device with the Port Station
Once connected, use any device according to the instructions
provided with the device.
Global Suspend Mode
When your computer is in suspend mode, the port station also
enters suspend mode to avoid power consumption. When your
computer wakes up, the port station wakes up automatically.
