7
Targus USB to Parallel Printer Cable
Troubleshooting
Device Not Working
• Disconnect the adapter from your computer’s USB
port, then reconnect it.
• Check that your computer is turned on, that is charged
(if running on a battery) and that the device is plugged
in and turned on (if applicable).
• Make sure that the adapter is firmly connected to both
your computer and the device.
• Disconnect the device from the adapter, then reconnect
it and restart your computer.
• Verify that you ran the Setup or Install program for the
device.
• Make sure that the device appears in Device Manager.
For more information refer to the following instructions.
Verifying Devices are Installed
You can view the devices installed on your computer from
the Device Manager Window in System Properties.
Right-click
My Computer
, then click
Properties
,
Hardware
tab, and the
Device Manager
button.
From the Device Manager window expands the Universal
Serial Bus controllers - displays the USB printing
support.
