background image

4

Your mobile computer displays the ActiveSync screen. You
can configure ActiveSync to start automatically upon LP-E
card insertion. Configure as desired, then tap 

Finish.

NOTE: For instructions on how to configure ActiveSync, refer to
the 

Low Power Ethernet Card

User’s Guide

, Appendix B: The

LP-E Applet.

5

When the Setup Complete screen appears, tap OK, then
reset your mobile computer to load the new software.

6

Remove the serial cable from your mobile computer, then
connect the LP-E card to an active Ethernet connection.

7

Insert the LP-E card into your mobile computer.

NOTE: For instructions on how to insert the LP-E card into your
Pocket PC, refer to the 

Low Power Ethernet Card

User’s Guide

,

Chapter 3: Hardware Setup - Connecting the LP-E card to Your
Computer.

8

Targus’ Ethernet driver displays the network icon on the
Windows CE status lin and launches ActiveSync
automatically. Your mobile computer displays the Targus 
LP-E Driver screen.

NOTE: Your Windows CE screens may differ from the examples
shown depending on what device type you use.

9

Tap 

OK.

CAUTION: To avoid conflicts with other devices on the network,
consult your network administrator for the proper settings.

8

Summary of Contents for PA610U

















Reviews: