Targus PA610U, Installation Manual

14 Reinsert the LP-E card into your mobile computer and

plug the LP-E card cable into the network.

CAUTION: The new IP settings will not take effect until your
reinsert the card. Resetting or power cycling your mobile
computer will not make it accept the new IP settings.

The ActiveSync screen appears.

15 Select 

Network Connection (usually at the bottom of the

list) and the name of the host PC.

16 Tap 

Connect... button.

Your mobile computer begins synchronization to the host
PC already on the network.

NOTE: By default, ActiveSync starts whenever you insert the
LP-E card. If you do not want to run ActiveSync automatically,
or if you want to run another program whenever you insert the
LP-E card, use Targus’ control panel applet. The applet also lets
you control other unique features of Targus’ Ethernet software.

For more detailed information, refer to the 

Low Power Ethernet

Card User’s Guide

, Appendix B: The LP-E Applet.

Connecting your mobile computer to an office network may
require information from your network administrator. If you get
the message that no IP address has been set, please contact
your network administrator.

10