NOTE: If you use a specific (also called “static”) IP address
instead of DHCP, you may need to enter the IP address of the
host computer in the Primary WINS field (step 6) to use
ActiveSync.
6
Tap the
Name Servers tab and enter DNS and WINS
addresses, if needed.
7
Tap OK.
8
Remove the LP-E card from your Pocket PC.
9 Reinsert the LP-E card into your Pocket PC and plug the
LP-E card cable into the network.
CAUTION: The new IP settings will not take effect until your
reinsert the card. Resetting or power cycling your Pocket PC
will not make it accept the new IP settings.
The ActiveSync screen appears.
10 Tap the
Connect... button.
Your Pocket PC begins the synchronizing process.
When synchronizing is complete, the Connection Status
screen appears.
5
Summary of Contents for PA610U
Page 1: ...Installation Guide Mobile Computer Low Power Ethernet Card Targus Low Power Ethernet Card ...
Page 2: ......
Page 15: ......
