5
REPLACING THE BATTERIES IN THE STAND-ALONE
SHUTTLE
Your Voice Recorder stores all messages in non-
volatile memory, eliminating the need to
synchronize your messages to your PC prior to
changing the batteries.
WARNING: To avoid damaging the stand-alone shuttle, do not
remove the Voice Recorder from the shuttle when replacing the
batteries.
To replace the batteries:
1.
Hold the Voice Recorder and stand-alone
shuttle in one hand with the three grooves
on the battery cover facing you.
2.
Press in the shuttle door latch with your
other thumb, gently open the hinged cover,
and remove the used batteries.
NOTE: Using a small pen or coin may help release the shuttle
door latch.
3.
Install the fresh batteries as indicated on the
inside of the pack, and close the hinged
cover until the latch clicks into place.
