4
4. Calibration
3. Interface
1. Drone Compass Calibration
Drone Compass Calibration should be finished outdoors.
(1)When should I Calibrate?
① It is suggested to calibrate compass when you first use Drone.
② Regularly calibrate the compass because it is easily interrupted by other electronic devices.
③ If RED Status LEDs on Drone blink twice per second, please do compass calibration before taking-off. If Drone has taken off,
please land as soon as possible and calibrate the compass.
(2)Calibration Steps
① Turn on Tarot APP and enter Flight Interface. Tap "Others" icon and choose Calibration icon to enter Calibration interface.
② Select "Calibrate Drone Sensor" option and choose "Calibrate Compass".
③ When Yellow LED is on, hold and rotate the drone horizontally until Green LED is on.
[1] Flight Mode
[2] Take-off / Land
[3] Go-home
[4] Set Go-home Point
[5] Nav. Mode
[6] Height
[7] Distance
[8] Horizontal Speed
[9] Vertical Speed
[10] Hover
[11] Change Map Direction
[12] Locate to Current Position
[13] Back to Home Page
[14] Flight Mode:
P icon means GPS Mode;
A icon indicates that you
should switch to GPS Mode
by your remote controller.
[15] Drone Satellites Nums
[ 1 6 ] D a t a Tr a n s m i s s i o n
Connection
[17] Smartphone Satellites
Nums
[18] Battery Voltage
[19] Setup
