Size: A4
Summit Arts Design Production LTD
1
Please take a few minutes before starting operation of the appliance and read the following operating instructions.
This product is intended for lighting and camera monitoring in indoor and outdoor areas. Do not use the product for other purposes. Any other use might lead to
damage of the product, property or personal injury.
WTT-1015 INSTRUCTION MANUAL
The product has both functions of lighting and remote security monitoring. It is easy for use and confi dential for security. The product features high-quality live
video, remote control of switching on/off, remote video monitoring and push notifi cation with captured images, if the motion is detected, which provides seamless
security monitoring with warning effects. The product is manufactured with high-brightness light source, good design of appearance, adjustable lighting / camera
angle, and easy for assembly / installation, use and debugging. This product can also be used with extended storage capacity by installing the SD card.
INSTALLATION
1. Mount the product onto the mounting surface.
Vertical mounting on the wall surface Horizontal mounting on the ceiling
2. Rotate the main body in 180°, in order to mount the product onto the ceiling.
3. The lamp heads can be rotated horizontally in 157°.
4. The lamp heads can be rotated vertically in 72°.
Adjust the lamp heads upward in 36°. Adjust the lamp heads downward in 36°.
5. Adjust the camera horizontally in 180°.
Adjust the camera rightward in 90°. Adjust the camera leftward in 90°.
6. Adjust the camera vertically in 37°.
Rotate the main body in 180°.
a. It is recommended to mount the product at a height of
2 - 2.5 m above the ground.
b. Fix the bracket onto the mounting surface with the
3 anchoring mounting sets.
c. Fit the main body onto the bracket and slide it to the end.
d. Press the release tongue to disengage and remove the
main body from the bracket.
t
(IM)29-019661-0002_WTT-FR+NL_V4_200831.indd 1
(IM)29-019661-0002_WTT-FR+NL_V4_200831.indd 1
31/08/2020 15:21
31/08/2020 15:21