16br
This function varies the movement resolution from 16 bit to 8 bit. The number of
channels utilised by the projector thus become either 14 (8 bit resolution) or 16 (16
bit resolution).
1) Press the
+
or
–
buttons until
16br (for resolution) is displayed
.
2) Press the
enter
button
3) Press the
+
or
–
buttons until
on is displayed
(
16 bit
resolution).
4) Press the
enter
button to confirm your selection.
5) Press the
+
or
–
buttons until
off
is displayed (
8 bit
resolution).
6) Press the
enter
button to confirm your selection.
LAti
This function provides information on the number of hours of operation of the lamp
in the unit.
1) Press the
+
or
–
buttons until
LAti
(for lamp life).
2) Press the
enter
button to confirm your selection; the display will show a numeri-
cal value which is the length of time in hours that the lamp has been operated
since the counter was last reset.
The lamp life counter needs to be reset to zero at every lamp change to provide
accurate information on lamp life
3) To perform a reset for this function, simultaneously press the
+
and
-
buttons and
the display will automatically reset.
4) Press
enter
to confirm the lamp life counter reset operation (
LAti
).
POti
This function displays the total number of hours which the ProSpot has been opera-
ted
1) Press the
+
or
–
buttons to display
POti
(for hours).
2) Press the
enter
button to confirm your selection; the display will show a numeri-
cal value which corresponds to the number of hours which the fixture has been
connected to mains power. Unlike LAti this function is not resettable.
menu enter
+
--
menu enter
+
--
menu enter
+
--
menu enter
+
--
menu enter
+
--
www.carlosmendoza.com.mx
