7) Press the
enter
button
8) The number of the display corresponds to the position of the projector. Press the
+
or
–
buttons and the number will change in the range from 0 to 255 displaying
the complete movement of the projector in the tilt direction.
9) Press the
+
or
–
buttons to display
Foc
(dEMo focus function).
10) Press the
enter
button
12)The number of the display corresponds to the position of the focus lens. Press the
+
or
–
buttons and the number will change in the range from 0 to 255 displaying
the complete movement of the focus lens.
13) Press the
+
or
–
buttons to display
Go
(dEMo gobos).
14) Press the
enter
button.
15) All the gobos or effects in the gobo wheel will be displayed in turn. Whilst this
is being undertaken, the display will show
run
.
4) To return to normal operation, press the
menu
button repeatedly.
Mod2
1) Press the
+
or
–
buttons to display
Mod2
(this function tests all the features of
the
ProSpot
and allows all the features of the unit to be viewed).
2) Press the
enter
button.
3) The display will show
run
and all the features of the fixture will be run.
rESE
This function causes a reset to occur in the case (however unlikely) that one or more
of the motors should lose its reference point.
1) Press the
+
or
–
buttons to display
rESE
(for reset).
2) Press the
enter
button to confirm your selection; all the motors will perform a
reset.
menu enter
+
--
menu enter
+
--
menu enter
+
--
menu enter
+
--
www.carlosmendoza.com.mx
