17. Test
The display panel on the
ProSpot
allows several tests to be performed which may
be useful when installing or testing a projector.
1) Press the
+
or
–
buttons to display
SPEC
(for special).
2) Press the
enter
button.
17.1 Manual testing of each motor (MAnU)
This test allows access to testing of each motor used in the
ProSpot
From the
SPEC function
(point 2)
3) Press the
+
or
–
buttons to display
MAnU
(for manual).
4) Press the
enter
button.
5) Press the
+
or
–
buttons to display the motor which you wish to test:
- Pan
(base motor movement). From
Pan1
to
Pan3
for 3 different positions
- tilt
(yoke motor movement).From
tilt1
to
tilt3
.
- SPEd
(movement speed). From
1
to
5
.
- CoLo
(color). From
1
to
18
for single colours and rotation of colour wheel
- EFEC
(prism). From
PriS
(for testing with the prism wheel) to
HOLE
(without the prism wheel).
- Prot
(prism rotation).from
Pro1
to
Pro9
.
- rGob
(rotating gobo wheel). From
rGo0
to
rGo7
.
- Grot
(rotating gobos). From
Gro1
to
Gro9
.
- Foc
(focusing). From
Foc1
to
Foc5
.
- Stro
(strobe effect). From
Open
to
Stro9
.
- dinr
(dimmer). From
din0
to
dinC
.
6) Press the
enter
button. At this point, you have noted the facility available to test
every motor function of the
ProSpot
.
17.2 DMX level readout (dMin)
This function allows the level of each DMX channel being received by the
ProSpot
.to be read.
From the
SPEC function
(point 2)
3) Press the
+
or
–
buttons to display
dMIn
(DMX values).
4) Press the
enter
button to confirm your selection.
5) Press the
+
or
–
buttons to display the DMX channel you wish to read a level,
from 0 a 255:
- Pan
(for base movement).
.
- tilt
(for yoke movement).
- SPEd
(movement speed).
- CoLo
(color).
- EFEC
(prism and macro).
- Prot
(prism rotation).
- rGob
(rotating gobo wheel).
- Grot
(rotating gobos).
- Foc
(focusing).
- Stro
(strobe effect).
- dinr
(dimmer).
menu enter
+
--
menu enter
+
--
menu enter
+
--
www.carlosmendoza.com.mx
