130 Technical Documentation
7733 Telegraph Road • Montebello, CA 90640 • (323) 726-0303 • http://www.tascam.com
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.
Page 2 of 2
FRONT AND BACK PANEL
ARCHITECT'S SPECIFICATIONS
The cassette player/recorder shall utilize a three head
cassette mechanism, using separate heads for erase,
record, and reproduce.
Inputs and outputs shall be provided on unbalanced RCA
connectors on the rear panel. The input level shall
be controlled by a single stereo input level control, aided
by a separate balance control. Headphone output with
level control shall be provided on the front panel.
Monitor selection switch shall be provided on the front
panel for selection between input monitor mode and
automatic monitor mode. Dolby™ B and C noise reduction
shall be implemented and switched from the front panel.
An MPX filter shall be switchable from the front panel.
A pitch control will provide approximately ±10% range
of pitch control.
A digital counter shall be used to display tape location. The
cassette deck shall have a dedicated button to access the
RTZ (Return to Zero) function.
The cassette deck shall mount in a standard 19" rack mount
form, using three standard rack spaces. The cassette
mechanism shall have dimensions of 19" x 5 1/4" x 11.4"
(W x H x D).
Metric measurements : 482 x 132 x 356mm (W x H x D).
The cassette recorder shall be a TASCAM 130.
NOTE: This text is available in a standard text file on TASCAM's
Sound Contractor CD-ROM. Contact TASCAM for details.
130_TECHDOC.pdf
032500
The 130 is available at:
