TASCAM Model 24
51
11 – USB audio interface functions
Installing the dedicated software
To use this unit as a USB audio interface with a Windows com-
puter, dedicated software must be installed on the computer.
Download the latest software from the product page on the
TEAC Global Site (
http://teac-global.com/
).
Installing the dedicated software will install a driver and a Set-
tings Panel application.
ATTENTION
Before starting to install software, quit other applications.
NOTE
With a Mac, the standard OS driver will be used, so instal-
lation of dedicated software is not strictly necessary. We
recommend installing this software, however, because it has
a notification function about updates for the unit firmware
and software.
Installing the Windows dedicated soft-
ware
Follow the procedures below to install the Windows dedicated
software.
ATTENTION
i
Complete installation of the Windows dedicated software on
the computer before connecting the unit to it with the USB
cable.
i
If you connected the unit to the computer using the USB ca-
ble before installing the Windows dedicated software and the
“
Found New Hardware Wizard
” launched, close the Wizard
and disconnect the USB cable.
Windows dedicated software installation
procedures
1.
Download the latest Windows dedicated software from the
TEAC Global Site (
http://teac-global.com/
) and save it on
the computer to be used with the unit.
2.
Uncompress the saved software (zip file) on the computer
desktop or another location.
3.
Double-click the “
TASCAM_Model_Mixer_Installer_x.xx.exe
”
file in the folder that appears after uncompression to launch
the installation software.
ATTENTION
If you open a zip file without decompressing it and dou-
ble-click the “
TASCAM_Model_Mixer_Installer_x.xx.exe
” file
in the folder that opens, installation will not start. Right-click
the zip file and select “
Extract All
”, for example, to decom-
press it and then try again.
4.
When a
Security Warning
or
User Account Control
screen
appears, click the
Yes
button.
5.
Read the contents of the User License Agreement, and se-
lect “
I accept the agreement
” if you agree to the terms. Then,
click the
Next >
button.
6.
Next, click the
Install
button.
7.
Next, click the
Install
button to start installation. (Windows
7 only)
8.
The following screen appears when installation has com-
pleted.
Click the
Finish
button.
The installer will quit and the Windows Settings Panel will
launch.
NOTE
The first time you connect the unit by USB to the computer
after installing the software, installation of the device driver
will be executed. Some time might be necessary before the
unit is recognized because Windows Update will be automat-
ically searched at this time. If the unit is still not recognized
after a while, open the software installation screen from the
notification area at the bottom right of the computer dis-
play, and click “
Skip obtaining driver software from Windows
Update
” to stop the search.
Summary of Contents for 24
Page 160: ...160 TASCAM Model 24 Block diagram Sch ma fonctionnel Diagrama de bloques...
Page 162: ......