TASCAM BD-MP1
BD-MP1
TASCAM BD-MP1
3
Update procedures
1.
Connect the USB flash drive to or load the disc on the prepared computer.
2.
Create a new folder on the drive/disc, and change its name to “
UPG
”.
Place the downloaded update files inside the “
UPG
” folder.
Update file names
i
8560_linux_demo_dbg.bin
i
mt8560_bl_linux.bin
After completing this, remove the drive/disc from the computer and load it on the unit.
CAUTION
Be careful not to use the wrong files, because no “revision” or “region” confirmation screens appear for them while updating.
3.
Select “
Upgrade
” from the unit System Settings menu.
Upgrade selection screen
4.
Depending on the medium to be used for the update, select “
Disc
” or “
USB Storage
” from the menu on the right side of the screen
(In the example above, “
USB Storage
” is selected.)
5.
Selecting the Media will start the update.
Upgrade selection screen
c
Upgrade starting screen
c
Installation in progress screen
