background image

3 – Cassette operations—Other tape functions and features

 TASCAM CC-222 

Owner’s Manual

 19

Fast forward and rewind

The 

REW

 and 

FFWD

 keys (and their remote control 

equivalents) act as ordinary fast forward and rewind 

keys when pressed when the unit is stopped or 
paused.

Search keys

When the unit is playing back, the wind keys men-
tioned above act as Computer-controlled Program 
Search (CPS) keys, moving to the next (or previous) 
recorded item. To locate items correctly, there must 
be at least four seconds of silence between these 
items (see “Recording silences between items” on 
page 18).

Repeated presses of these keys will search forward or 
backward by the appropriate number of items. The 
tape counter value is replaced by 

CPxx

 if searching 

forward, and 

CP–xx

 when searching backwards.

Note that the terms “forwards” and “backwards” here 
are relative to the currently-selected play position.

When the item is reached, playback starts. When the 
end of the tape is reached, the transport stops.

If a key are pressed too many times, so that a search 
is being made for the wrong item, pressing the 
“opposite” key corrects the mistake.

NOTE

This function depends on the presence of 4-second 
silent intervals on tape. If these intervals are too short, 
or not truly silent, the search function will not work 
properly. Also note that this function can be “confused” 
by the presence of longer quiet or select passages in 
programs (e.g. spoken word drama or classical music).

Summary of Contents for CC-222











































Reviews: