5 – Recording CDs—Copy-protection
TASCAM CC-222
Owner’s Manual
33
The fade-in and fade-out times can be reset to new
values while recording is in progress.
Fades are also possible in digital direct mode (“Digi-
tal direct” on page 32).
Copy-protection
The CC-222 allows copy-protection to be applied to
the discs produced. Naturally, the copy-protection
applies only to digital-to-digital copies.
There are three settings:
•
FREE
(may be freely copied), where no copy-pro-
tection is applied to the recorded disc.
•
1GEN
(single-generation copying), where one
digital copy (“child”) can be made from the
recorded disc, but no digital copies (“grandchil-
dren”) can be made from the child.
•
PROH
(copy prohibited) which prevents any digi-
tal copies being made from the recorded disc
1
Press the
MENU
key repeatedly until the dis-
play shows
COPY ID>XXXX
, where
XXXX
is the current setting for copy-protec-
tion as shown above.
2
Turn the
MULTI DIAL
or use the
SKIP
keys to
change the copy-protection setting.
NOTE
Copy-protection applies on a ““per-track”, not a per-
disc basis. This means that you can apply different copy-
protection levels to different tracks (but you can’t apply
different copy-protection levels to different parts of the
same track). If copy-protection is important to your
work, you may want to check this setting every time
you make a recording, to ensure that you have the pro-
tection level that you want.
