1. Test Mode
The test mode is intended for use in the pre-shipping inspec-
tion at the factory and in the maintenance after shipment.
1. How to enter test mode
With no disc loaded in the CD player, hold down the STOP
and REW SEARCH keys and turn the system ON. Continue
holding down the two keys until “
TEST MD
” is displayed.
“
WELCOME
” is displayed first, and then “
TEST MD
” is dis-
played to indicate that the test mode menu is available.
The test mode is exited when the system is turned OFF.
2. Test mode menu
Press the FOLDER
˙
/
¥
key to select a test item, and
press the REPEAT key to enter the selection.
To return to the test mode menu from the selected item,
press the DISPLAY key.
3. Details of test modes
1] CD pitch control potentiometer setting
(CD-200 only)
After replacing the analog PCB or front
PCB, be always sure to perform the CD pitch con-
trol potentiometer setting.
(1)In the test mode menu, display “
n01 PITCH VR
” and press
the REPEAT key.
(2)When “
VR CENT?
” is displayed, set the potentiometer to
the center (click position) and press the REPEAT key.
(3)When “
VR MIN?
” is displayed, turn the potentiometer to
the – end (MIN position) and press the REPEAT key.
(4)When “
VR MAX?
” is displayed, turn the potentiometer to
the + end (MAX position) and press the REPEAT key.
CAUTION
1. テストモード
工場での出荷検査及びハードウェアのメンテナンスを目的とし
たテストモードです。
1. テストモードへの入り方
CDにDISCをローディングしない状態で、「STOP」と
「REW SEARCH」キーを押したままで電源を入れます。キ
ーは
TEST MD
が表示されるまで押し続けてください。
WELCOME
表示後、
TEST MD
と表示されテストモー
ドメニューに入ります。
テストモードは電源OFFで終了します。
2. テストモードメニュー
「FOLDER
˙
」又は「FOLDER
¥
」キーにてテスト項目を
選択し「REPEAT」キーを押して決定します。
各項目からテストモードに戻るには「DISPLAY」キーを押
します。
3. 各テストモードの説明
1] CDピッチコントロールボリューム設定
(CD-200
のみ
)
アナログPCB/フロントPCBを交換した場合は、CDピ
ッチコントロールボリューム設定を必ず実行して下さい。
(1) テストモードメニューで
n01 PITCH VR
を表示させて
「REPEAT」キーを押します。
(2) ディスプレイに
VR CENT?
が表示されたら、ボリューム
をセンター(クリック位置)に合わせて「REPEAT」キーを
押してください。
(3) ディスプレイに
VR MIN?
が表示されたら、ボリューム
を−方向(MIN位置)に回し「REPEAT」キーを押してくだ
さい。
(4) ディスプレイに
VR MAX?
が表示されたら、ボリューム
を+方向(MAX位置)に回し「REPEAT」キーを押してく
ださい。
注意
電源オン積算稼働時間確認
Display
(表示)
Description
(操作内容)
No
PITCH VR
CD Pitch control potentiometer setting. (CD-200 only)
CDピッチコントロールボリューム設定
(CD-200
のみ
)
1
LCD TEST
LCD/LED display testing.
LCD/LED表示検査
2
KEY TEST
Front key testing.
フロント部のキー検査
3
FACT DEF
EEPROM initialization(For use in factory)
EEPROMの初期化(工場出荷用)
4
REM TEST
IR remote control testing.
赤外線リモコン検査
Total power ON time check.
5
LIF TIM
6
−
6
−
3. Test Mode and Special Displays
テストモードと特殊表示
TASCAM CD-200/CD-200i
Summary of Contents for CD-200
