background image

TASCAM  CD-200BT

 5

Safety Information

 

8

For European Customers

Disposal of electrical and electronic equipment

(a)  All electrical and electronic equipment should be 

disposed of separately from the municipal waste 

stream via designated collection facilities appointed 

by the government or the local authorities.

(b) By disposing of the electrical and electronic 

equipment correctly, you will help save valuable 

resources and prevent any potential negative effects 

on human health and the environment.

(c)  Improper disposal of waste equipment can have 

serious effects on the environment and human health 

as a result of the presence of hazardous substances in 

electrical and electronic equipment.

(d) The crossed out wheeled dust bin symbol indicates 

that electrical and electronic equipment must be 

collected and disposed of separately from household 

waste.

(e)  The return and collection systems are available to 

the end users. For more detailed information about 

disposal of old electrical and electronic equipment, 

please contact your city office, waste disposal service 

or the shop where you purchased the equipment.

Disposal of batteries and/or accumulators

(a)  Waste batteries and/or accumulators should be 

disposed of separately from the municipal waste 

stream via designated collection facilities appointed 

by the government or the local authorities.

(b) By disposing of waste batteries and/or accumulators 

correctly, you will help save valuable resources and 

prevent any potential negative effects on human 

health and the environment.

(c)  Improper disposal of waste batteries and/or accumu-

lators can have serious effects on the environment 

and human health as a result of the presence of 

hazardous substances in batteries and/or accumu-

lators.

(d) The crossed out wheeled dust bin symbol indicates 

that batteries and/or accumulators must be collected 

and disposed of separately from household waste.

 

If the battery or accumulator contains more than 

the specified values of lead (Pb), mercury (Hg), and/

or cadmium (Cd) defined in the Battery Directive 

(2006/66/EC), then the chemical symbols for lead (Pb), 

mercury (Hg) and/or cadmium (Cd) will be indicated 

beneath the crossed out wheeled dust bin symbol.

Pb, Hg, Cd

(e)  The return and collection systems are available to 

the end users. For more detailed information about 

disposal of waste batteries and/or accumulators, 

please contact your city office, waste disposal service 

or the shop where you purchased them.

 

8

For China

“仅适用于海拔 2000m 以下地区安全使用”

“仅适用于非熱帯气候条件下安全使用”

产品有毒有害物质或元素的名称及含量

机种 :CD-200BT

有毒有害物质或元素

品名

(Pb)

(Hg)

(Cd)

六价铬

(Cr6+)

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

1

CHASSIS 部份

2

FRONT PANEL 部份

3

螺丝部份

4

线材部份

5

PCB Assy 部份

×

6

CD MECH 部份

7

电源部份

8

附属品部份

×

9

LABEL 部份

10

包装部份

 

○ :表示该有毒有害物质在该部件所有均质材料中的含有量均在 SJ/T11363-2006 标准规定的限量要求以下。

 

× :表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。

 

(针对现在代替技术困难的电子部品及合金中的铅 )

Summary of Contents for CD-200BT

































Reviews: