TASCAM CD-200SB
27
4 – Playback
Repeat playback
You can play back all the tracks in the playback area repeatedly.
Press the main unit REPEAT [PITCH] button or the remote
REPEAT button to turn the repeat playback function ON/OFF.
Repeat ON (REPEAT indicator appears)
All tracks are played back repeatedly.
Repeat OFF (no indicator)
Repeat playback is OFF.
NOTE
•
With data CDs, SD cards and USB flash drives, during folder
playback all tracks within the current folder will be played
back repeatedly. During program playback, all tracks within
the program will be played back repeatedly.
•
If the repeat playback function is turned ON during
playback, playback continues as is until the end and then
playback continues from the beginning.
•
If repeat playback is turned ON when stopped, repeat
playback begins when the
PLAY/PAUSE
button is pushed.
•
The repeat playback function’s ON/OFF state is retained
even when the power is turned OFF.
Time and text information display
You can set what type of time and text information is shown on
the display.
Press the DISPLAY [SHIFT] button on the main unit or the
DISPLAY button on the remote control to show for two seconds
the type of information (playback time or text information) that
is currently set to appear in the main area of the display. Press
this button again while this is being shown to change the type
of information displayed.
The types of data that can be shown when changing the display
depend on the type and status of the current media or loaded
disc, as well as this unit’s operation status.
8
Audio CDs with CD text
When playing back or paused, you can change the infor-
mation shown on the display, cycling through track elapsed
time, track remaining time, total remaining time, track title
and track artist.
When stopped, you can also change the information shown,
but the album title, album artist and total number of tracks
and total playback time are shown.
8
Audio CDs without CD text
When playing back or paused, you can change the infor-
mation shown on the display, cycling through track elapsed
time, track remaining time and total remaining time.
When stopped, you can also change the information shown,
but the total number of tracks and total playback time are
shown.
8
Data CD
When playing back or paused, you can change the infor-
mation shown on the display, cycling through track elapsed
time, track title, track artist and file name.
When stopped, you can still change the display mode from
the track elapsed time to the album title.
When stopped, you can switch to the album title (current
folder).
8
SD card/USB flash drive
When playing back, paused or stopped, you can change the
information shown on the display, cycling through track
elapsed time, track remaining time, title, artist and file name.
