32
TASCAM CD-200SB
6 – Direct folder function
You can assign folders on an SD card or USB flash drive to the
main unit FOLDER/TRACK SELECT (1–10/0) buttons. When you
press a button with an assigned folder, you can immediately
select that folder on the SD card or USB flash drive and start
playback.
A folder that has been assigned to a main unit FOLDER/TRACK
SELECT (1–10/0) button using this function is called a “direct
folder”.
A maximum of 10 direct folders can be assigned.
NOTE
•
The direct folder function can only be used with SD cards
and USB flash drives. It cannot be used with audio or data
CDs.
•
The main unit
FOLDER/TRACK SELECT (1–10/0)
buttons
and the remote number
(1–10/0)
buttons can be used in the
same way.
•
You can assign direct folders to the main unit
FOLDER/
TRACK SELECT (1–10/0)
buttons for each SD card and USB
flash drive.
•
You cannot mix the direct folder assignments of the main
unit
FOLDER/TRACK SELECT (1–10/0)
buttons between an
SD card and a USB flash drive.
Saving direct folder settings
With this unit, direct folder assignments that have been made
for the main unit FOLDER/TRACK SELECT (1–10/0) buttons
(direct folder settings) are automatically saved to each SD card
and USB flash drive.
This data is saved in a CD-200SB settings file named, “cd-200sb.
dat” that is created in the root of each SD card and USB flash
drive used with this unit.
Do not alter this settings file, because doing so could result in
not being able to use the direct folder function correctly and
other problems.
o
This file is automatically saved when playback of the media
is stopped.
o
If settings are changed when playing back or paused, they
will be saved automatically when playback is stopped.
During automatic saving,
WRITING
appears on the display. In
addition, settings saved on media will be automatically read the
next time the media is loaded (for example, when the power
is turned ON), enabling use of direct folder settings for the
FOLDER/TRACK SELECT (1–10/0) buttons quickly.
NOTE
•
If an SD card or USB flash drive is loaded in another
CD-200SB unit, the direct folder settings saved on it will
automatically be read from that media, enabling use of
direct folder settings for the
FOLDER/TRACK SELECT
(1–10/0)
buttons quickly.
•
If a direct folder assignment has been changed during
playback or when paused, be sure to stop playback once so
that the setting can be saved to the media.
•
If an SD card or USB flash drive is write-protected, the direct
folder settings cannot be saved to that media. In this case,
PROTECT
will appear on the display for a few seconds
before disappearing.
•
If the media does not have enough open space, direct
folder settings cannot be written to it. In this case,
FULL
will appear on the display for a few seconds before disap-
pearing.
•
If direct folder settings cannot be written to the media for
the above reasons, they will be lost when this unit’s power is
turned OFF.
Assigning direct folders
Using this function, folders on SD cards and USB flash drives can
be assigned to the main unit FOLDER/TRACK SELECT (1–10/0)
buttons as direct folders.
Assignments can either be made individually or automatically all
at once. In either case the maximum number of assignments is
10.
