TASCAM CD-200SB
45
10 – Troubleshooting
If you have problems with your system, look through this
chart and see if you can solve the problem yourself before
calling the nearest retailer or TASCAM representative.
8
No power
e
Is the unit’s power plug completely inserted into a working
power outlet?
8
Remote control doesn’t work.
e
Check to see if the batteries are properly installed in the
remote control.
e
If the batteries are dead, change the batteries.
8
No sound
e
Check the connection to the monitor system again.
e
Check the volume and settings of the amplifier.
8
There is unwanted noise.
e
Are the connecting cables all properly connected and
functioning?
8
A CD cannot be played back.
e
If you are using a data CD with MP3 files, confirm that the file
bit-rates are compatible with this unit.
e
Is the disc scratched or dirty?
8
I cannot play back all the files on a data CD, SD card
or USB flash drive.
e
Make sure the unit is not in folder playback mode.
8
I cannot use program playback.
e
Make sure the playback area is not set to
ALL PLAY
.
To use program playback with data CDs, SD cards and USB
flash drives, the playback area must be set to
FOLDER
.
