Tascam CD-200SB, Owner'S Manual

34 

TASCAM  CD-200SB

6 – Direct folder function

3.  Press the main unit SET [AUTO SET] button or the remote 

AUTO SET button again. 

The unit automatically checks which of the 1–10/0 buttons 

do not yet have direct folder assignments and assigns folders 

to them. 

SETTING

 appears on the display while this is happening. 

After registration completes, 

DONE

 will appear on the display 

for a few seconds and then the unit will return to ordinary 

playback mode.

When the main unit CANCEL indicator is blinking, you can 

press the CANCEL button on the main unit or the remote to 

cancel assignment and return to ordinary playback mode.

NOTE

•  FOLDER/TRACK SELECT (1–10/0)

 buttons that already 

have assignments will not be overwritten. 

• 

Unlike during individual folder assignment, the indicators 

for 

FOLDER/TRACK SELECT (1–10/0)

 button that do not yet 

have direct folder assignments do not blink. 

• 

Assignments are made in the same order as folder searching 

as described in see “Folders and tracks on data CDs, SD 

cards and USB flash drives” on page 20. However, since 

already assigned folders are excluded, the same folder will 

not be assigned to more than one 

FOLDER/TRACK SELECT 

(1–10/0)

 button.

• 

Assignments are made to 

FOLDER/TRACK SELECT (1–10/0)

buttons in order starting with the lowest number. 

Changing individual direct folder 

assignments

When assigning direct folders, indicators light on the main unit 

FOLDER/TRACK SELECT (1–10/0) buttons that already have 

direct folder assignments. 
To change direct folder assignments, you must overwrite them. 
1.  Press the MEDIA SELECT button on the main unit or the 

remote and select the media that contains the folder that 

you want to assign as a direct folder. (See “Selecting the 

playback media” on page 19.)

2.  Press the main unit SET [AUTO SET] button or the remote 

SET button to enable direct folder setting mode.

3.  Use the main unit or remote FOLDER 

g

/

t

 buttons to 

select the folder that you want to assign.

4.  Press a FOLDER/TRACK SELECT (1–10/0) button that 

already has a direct folder assignment (indicator lit). The 

indicator for that button will start to blink. At the same time 

the indicators for all other buttons will become unlit. 

UPDATE

 appears on the display, showing that the unit is 

ready to change the assignment. 

5.  Press the FOLDER/TRACK SELECT (1–10/0) button, which 

now has a blinking indicator, again to change the direct 

folder assignment. 

When the main unit CANCEL indicator is blinking, you can 

press the CANCEL button on the main unit or the remote to 

cancel assignment and return to step 2 above (direct folder 

setting mode).

NOTE

• 

Changing direct folder assignments never erases folders on 

media or audio files within folders.

• 

You can use the 

FOLDER 

g

/

t

 buttons on the main unit 

or the remote control to select folders and assign them to 

different 

FOLDER/TRACK SELECT (1–10/0)

 buttons.