TASCAM CD-400U DAB
33
E
6 – Using DAB tuner
0
Press the main unit HOME/MENU button or remote control
MENU button again to return to the ordinary display.
DRC
Use this option to adjust the amount of Dynamic Range Control
(DRC) applied to received broadcasts. DRC is used to reduce the
range between high and low volumes of audio and is sometimes
applied at the broadcast source. Pop music might have a high
value of DRC applied, appropriate for constantly high listening
levels, while classical music broadcasts might have no DRC applied
to allow the listener to hear the full dynamic range of the source
volume.
0
You can select one of the three DRC settings: off, low, high.
DAB DRCsetting
< DRC OFF >
When set to high, the broadcast DRC is applied. Set to low, only
half the broadcast DRC value is applied. Set to off, no DRC is
applied.
Broadcast station presets
This unit can have up to 20 DAB station presets.
Setting radio station presets manually
1.
Select
DAB
as the current source. (see “Selecting the playback
2.
Tune in the station that you want to add as a preset. (see
“Changing the received frequency” on page 34)
3.
Press the main unit 7 [M.PRESET] button when shift mode is
active (SHIFT indicator lit) or press the remote control PRE-
SET button.
P01
will blink at the top of the Home Screen.
DAB P01 Classic
DLS message 1/5
NOTE
i
The blinking
P01
will disappear after some time passes.
i
If
*
appears, the preset already has an assigned frequency.
4.
Turn the main unit MULTI JOG dial or use the remote con-
trol
.
/
/
[
l
/
;
] buttons to select the preset number to
assign.
5.
Press the main unit MULTI JOG dial or remote control ENTER
button to confirm the preset.
Selecting presets
0
When in preset mode, turn the main unit MULTI JOG dial or
use the remote control
k
and
j
buttons to select a preset
station.
0
You can also use the main unit or remote control number but-
tons to directly enter a preset number, and press the ENTER
button to select that station.
NOTE
0
There is no automatic preset function.
0
Using Local scan or Full scan will erase presets that have al-
ready been added.
The first station found using Local scan or Full scan will automa-
tically be added to P01.
0
Presets that have not had a station assigned to them will be
skipped and cannot be selected.
In the following example, P01, P05, P06 and P08 have stations
assigned, while P02-04 and P07 do not.
k
k
k
P01
§
P05
§
P06
§
P08
j
j
j
Summary of Contents for CD-400U DAB
Page 213: ...TASCAM CD 400U 213...
Page 214: ...214 TASCAM CD 400U...
