Tascam CD-400U, Owner'S Manual

14 

TASCAM  CD-400U

2 – Names and Functions of Parts

a

 8 [FM MODE] button

i

Press to input track number 

8

 when the current source is 

CD

, 

USB

 or 

SD

 and the play area is set to "ALL". (see “Selecting 

tracks directly” on page 25)

i

When the current source is 

AM

 or 

FM

, press to tune in a pre-

set station.

i

When the current source is 

FM

, and shift mode is active 

(SHIFT indicator lit), press to switch between stereo and 
mono for FM broadcast reception.  (see “Setting the FM 
mode” on page 32)

s

 9 [P.AREA] button

i

Press to input track number 

9

 when the current source is 

CD

, 

USB

 or 

SD

 and the play area is set to "ALL". (see “Selecting 

tracks directly” on page 25)

i

When the current source is 

AM

 or 

FM

, press to tune in a pre-

set station.

i

When the current source is 

USB

 or 

SD

 and shift mode is 

active (SHIFT indicator lit), press to set the play area. (see 
“Setting the playback area” on page 24)

d

 0 [DUB] button and indicator

i

Press to input track number 

0

 when the current source is 

CD

, 

USB

 or 

SD

 and the play area is set to "ALL". (see “Selecting 

tracks directly” on page 25)

i

When the current source is 

AM

 or 

FM

, press to tune in a pre-

set station.

i

When the current source is 

CD

 and playback is stopped or 

the current source is 

AM

/

FM

, press with shift mode active 

(SHIFT indicator lit) to start dubbing (copying) preparation. 
The indicator lights when the dubbing (copying) function 
is active. (see “Dubbing procedures” on page 36)

f

 CLEAR button

i

When the current source is 

CD

, 

USB

 or 

SD

, press this to clear 

values input with number buttons.

i

Press to close a warning message that has appeared on the 
Home Screen.

i

When the current source is 

AM

 or 

FM

, press and hold to clear 

all preset stations for that source. (see “Clearing preset as-
signments” on page 33)

g

 SHIFT button and indicator

Press this button to light the indicator and enable shift mode, 
which activates the shift functions of other buttons. (These 
functions are shown below the buttons with white letters on 
dark blue backgrounds.)
To deactivate the shift mode (SHIFT indicator unlit), press the 

SHIFT button again.

h

 SOURCE button

Press to switch the current source. (see “Selecting the play-
back source.” on page 22)

j

 DISPLAY button

i

Press during playback to show a variety of information. (see 
“Time and text information display” on page 30)

i

Please ignore INFO on the remote control unit. (INFO func-
tion does not work on this unit.) This button does not work 
at all on the USA/Canadian model.

i

Press when the current source is 

FM

 to switch the RDS 

mode. (see “RDS (European model only)” on page 34)

k

 BACK [PAIRING] button

i

When the 

MENU

 screen is open, press to return to the Home 

Screen.

i

When a 

MENU

 setting screen is open, press to go up one 

menu level.

i

When the current source is 

USB

 or 

SD

 and the play area is 

folder (  icon shown), press to move up one folder level. 
(see “Playback area” on page 24)

i

When the current source is 

BLUETOOTH

, press and hold to 

activate Bluetooth pairing mode.

When a Bluetooth con-

nection is active (

Connected

 shown), press to disconnect 

forcefully. (see “Pairing” on page 31)

l 

SD card slot

Insert SD cards in these slots. (see “Inserting and removing SD 
cards” on page 21)

; 

USB port

Connect (and disconnect) USB flash drives here. (see “Con-
necting and disconnecting USB flash drives” on page 22)