TASCAM CD-400U
19
3 – Preparation
Making connections
This is an example of CD-400U connections.
Precautions before making connections
0
Carefully read the operation manuals of the devices to be connected and then connect them correctly.
0
Before making connections, turn this unit and all equipment to be connected off (standby).
0
Install all connected devices, including this unit, so that they are powered from the same line. When using a power strip or similar de-
vice, be sure to use one that has high current capacity (thick cable) in order to minimize fluctuations in power voltage.
AC IN
100-240V 50/60Hz 20W
AC IN
100-240V 50/60Hz 20W
ANALOG
IN
(UNBALANCED)
L
R
ANALOG
IN
(UNBALANCED)
L
R
ANALOG IN
(BALANCED)
L
R
Portable audio player
Headphones
Mixer, recorder, amp, etc.
Computer
FM antenna
AM antenna
Assembling the AM antenna
To assemble the AM antenna, rotate the antenna base in the direction of the arrow, and insert the hook at the bottom of the antenna
loop into the long hole in the antenna base.
1
2
3
Antenna base
Hook