TASCAM CD-400U
31
5 – Bluetooth device playback
This unit can output sound from a computer, portable audio de-
vice or other equipment that supports Bluetooth (A2DP). More-
over, if the Bluetooth device supports AVRCP, the PLAY button
and other controls on this unit can be used to control playback
on the Bluetooth device.
Pairing
Follow the procedures below to enable communication with a
Bluetooth device.
NOTE
Pairing also requires operation of the Bluetooth device.
Refer to the operation manual of the Bluetooth device for
procedures.
1.
Select
BLUETOOTH
as the current source. (see “Selecting the
2.
Press and hold the main unit BACK [PAIRING] button or re-
mote control DISPLAY/RDS/INFO [PAIRING] button.
A
PAIRING
message will blink on the display.
BLUETOOTH
PAIRING
3.
Enable Bluetooth transmission on the other Bluetooth de-
vice.
4.
Select CD-400U (this unit) on the other Bluetooth device.
When pairing succeeds, this unit and that device will be
connected and
Connected
will appear on the Home Screen.
BLUETOOTH
Connected
NOTE
i
Some older Bluetooth devices require the input of a passkey.
Enter
0000
in such cases.
i
Pairing will automatically end if connection is not confirmed
within two minutes.
i
When this unit is turned on, it will automatically try to con-
nect with the Bluetooth device to which it was previously
connected. At this time, pairing will automatically end after
five minutes if connection is not possible because that Blue-
tooth device is not turned on or its Bluetooth function is
turned off.
Usable controls
Controls on the main unit and included wireless remote control
(RC-CD400) can be used to control the connected Bluetooth de-
vice if it supports AVRCP.
Main unit
Remote control
Function
PLAY button
7
button
Play
PAUSE button
9
button
Pause
STOP button
8
button
Stop
MULTI JOG dial
turning
.
/
/
[
l
/
;
]
buttons
Selects tracks
m
/
,
[FAST]
buttons
m
/
,
buttons
Search backward
and forward
CAUTION
Operation might not occur properly depending on the con-
nected Bluetooth device.
Playback from a Bluetooth device.
After pairing with the other Bluetooth device in advance, follow
the procedures below for playback from it.
1.
Select
BLUETOOTH
as the current source. (see “Selecting the
2.
Connect to CD-400U (this unit) on the other Bluetooth de-
vice.
Connected
appears on the Home Screen when connection
completes.
Controls on the main unit and included wireless remote control
(RC-CD400) can be used to control the connected Bluetooth
device, and this unit can output the playback sound from the
Bluetooth device.
Unpairing
The Bluetooth device that is currently connected can be un-
paired from the unit.
1.
Select
BLUETOOTH
as the current source. (see “Selecting the
2.
Press the main unit BACK [PAIRING] button or remote con-
trol DISPLAY/RDS/INFO [PAIRING] button.
A
Disconnect?
message will appear on the display.
BLUETOOTH
Disconnect?
3.
Press the main unit MULTI JOG dial or remote control EN-
TER button to unpair the device.
Press the main unit BACK [PAIRING] button or remote con-
trol CLEAR button to cancel unpairing.
4.
After unpairing, ordinary operation will start.
