TASCAM CD-400U
33
6 – Listening to AM/FM radio
Selecting preset stations
0
When in preset mode, turn the main unit MULTI JOG dial or
use the remote control
k
and
j
buttons to select a preset
station.
0
You can also use the main unit or remote control number
buttons to directly enter a preset number, and press the EN-
TER button to select that station.
Clearing preset assignments
1.
Select the current source for the preset to be cleared (
AM
or
FM
). (see “Selecting the playback source.” on page 22)
2.
Press and hold the main unit or remote control CLEAR but-
ton.
The following message will appear on the Home Screen.
FM Clear all
Presets OK?
Before clearing FM station presets
AM Clear all
Presets OK?
Before clearing AM station presets
3.
Press the main unit MULTI JOG dial or remote control EN-
TER button.
After all preset assignments for the current source have
been cleared, the Home Screen reopens.
NOTE
Press the main unit or remote control CLEAR button to
cancel
the operation and
return to the Home Screen.
Muting tuner broadcast sound
The tuner can be muted when reception is poor or unpleasantly
noisy.
1.
Select the
Tuner AutoMute
item on the
MENU
screen to open
the
Tuner AutoMute
screen. (see “Menu operation proce-
Tuner AutoMute
< OFF >
2.
Turn the tuner mute function on/off.
Options:
OFF
(default),
ON
3.
Confirm the setting and return to the
MENU
screen.
Setting the tuner broadcast outputs
You can set whether tuner broadcast signals are output from the
TUNER OUT jacks only or from all the main unit jacks (TUNER
OUT, ANALOG OUT and PHONES jacks).
1.
Select the
Tuner Out Set
item on the
MENU
screen to open
the
Tuner Out Set
screen. (see “Menu operation proce-
TunerOut Set.
< ALL >
2.
Set the outputs for sounds from the tuner.
Option
Meaning
TUNEROUT
Tuner broadcasts sounds are output
only from the TUNER OUT jacks.
ALL
(default)
Tuner broadcast signals are output
from all the main unit jacks (TUNER
OUT, ANALOG OUT and PHONES
jacks).
3.
Confirm the setting and return to the
MENU
screen.
NOTE
The tuner audio output setting is retained even when the
unit is turned off.
