Tascam CD-6010, Owner'S Manual

TASCAM CD-6010

23

5 – Operation

Using the SEARCH buttons

You can search forward and backward in a track while 

listening to it.

1  Play or pause the desired track.
2  Press and hold a SEARCH 

Ô

/



 [AUTO CUE/

AUTO READY] button on the player or a SEARCH 

Ô

/



 button on the remote to start searching 

forward or backward.

3  Release the button that you are holding to stop 

searching and return the player to the state it was in 

before searching (playback or pause).

NOTE

The search function cannot be used with data CDs. 

Using the jog function to search

You can use the jog function to search a track one frame 

at a time. However, this function cannot be used with data 

CDs. 

Using the front panel buttons: 

When paused, press the 

JOG

 button to enter jog mode, 

and turn the 

TRACK SKIP/DATA

 knob to search the track 

one frame at a time. 

Using the remote control: 

When paused, press a 

JOG (+/–)

 button to enter jog mode.

Press the 

+

 button to advance one frame, and press the 

−

button to go back one frame. 

NOTE

In jog mode, if you stop searching, playback will pause, but 

the sound at the current position will be output continuously. 

Playback modes

This unit has 4 playback modes. 
The current playback mode is indicated on the display.

Continuous playback mode (default) 

ª

Nothing appears in the playback mode indication area at 

the top of the display.
The tracks on the disc are played back in numerical order. 

Single playback mode 

ª

S

 appears in the playback mode indication area at the top 

of the display. 
The selected track is played back once and then playback 

stops.

Program playback mode 

ª

PGM

 appears in the playback mode indication area at the 

top of the display. 
Tracks are played back in the order programed in advance. 

(See “Program playback” on page 28.) 

Random playback mode 

ª

RANDOM

 appears in the playback mode indication area at 

the top of the display. 
Tracks on the disc are played back in random order. 

Selecting the playback mode 

Use the following procedures to set the desired playback 

mode using the controls on the player or the included 

TASCAM RC-500 remote control. 

Using the front panel buttons: 

Press the 

PLAY MODE [REPEAT]

 button to cycle through 

the playback modes. 

Using the remote control: 

Press the 

PLAY MODE

 button to cycle through the 

playback modes. 

Ordinary

playback

Single

playback

Program

playback

Random

playback

NOTE

Playback mode settings are retained even when the power is 

turned off.