Tascam CD-6010, Owner'S Manual

10

TASCAM CD-6010

2 – Names and Functions of Parts

Front panel

1

  POWER switch 

Press to turn the power on and off. 

CAUTION

Before turning the power on, minimize the volume of other 

equipment that is connected to this unit. Failure to do so 

might cause sudden loud noises, which could harm your 

hearing or result in other trouble. 

2

  Disc tray 

Press the 

OPEN/CLOSE

 button to open the disc tray 

when you want to load or remove a disc. 

To close the disc tray, press the 

OPEN/CLOSE

 button 

again.

3

  OPEN/CLOSE button 

Press to open and close the disc tray. 

4

  SHIFT button and indicator 

Press this button to activate shift mode. When the 

shift mode is active, the indicator lights and the shift 

functions of other buttons are enabled. (Shift functions 

are shown below buttons with white lettering on a 

dark blue background.) After pressing one of these 

buttons, shift mode is automatically ended and the 

indicator becomes unlit.

NOTE

When in shift mode, press the SHIFT button again to end 

• 

shift mode (and turn off the indicator). After searching 

folders/directories, if the SHIFT indicator is lit, press the 

SHIFT button to end shift mode.
You can also press a button with a shift function while 

• 

pressing and holding the SHIFT button to use its shift 

function.

5 

DISPLAY [LOCK] button

Press this button when the playback time is shown to 

switch the playback time display mode (track elapsed 

time, track remaining time or total remaining time). 

(See “Changing the playback time display mode” on 

page 32.) 
When in menu mode, press this button to exit menu 

mode.

To turn the panel lock function on and off, press and 

hold this button when in shift mode (when the 

SHIFT

indicator is lit) or while pressing the 

SHIFT

 button. 

This function prevents the use of the buttons to avoid 

misoperation.

6

  Display 

Shows various types of information.

7

  TRACK SKIP/DATA [INDEX/DIR SEARCH] knob 

This is a multifunction knob that works as both a dial 

and a button. Use this knob to select (skip) tracks, 

select indexes, select directories, set the pitch control 

value, use menus, set the A-B repeat interval and as a 

jog dial, for example.
To select an index, turn this knob when in shift mode 

(when the 

SHIFT

 indicator is lit) or while pressing the 

SHIFT

 button. When working with a data CD, use this 

function to select a directory. What happens after 

selection depends on the auto cue function setting. 

(See "Skipping to the next or previous track" on page 

22.)
When in program setting mode, use this function to 

select tracks.
When in menu mode, turn this knob to select items 

and press it to confirm a selection. (See “Menu 

operation basics” on page 19.) 
When in pitch adjustment mode, turn this knob to 

adjust the pitch value. (See "Pitch control playback" on 

page 27.)
When in jog mode, use this knob as a jog dial to search 

one frame at a time. (See “Using the jog function to 

search” on page 23.) 
When using the A-B repeat function, press this knob 

to set the A and B points. (See “A-B repeat playback” on 

page 26.)

8 

JOG [PITCH] button

Press this button to start jog mode. (See "Using the jog 

function to search" on page 23.)
To turn the pitch function ON/OFF, press this button 

when in shift mode (when the 

SHIFT

 indicator is lit) or 

while pressing the 

SHIFT

 button. (See "Pitch control 

playback" on page 27.)