18
TASCAM CD-601MKII
MENU OPERATIONS
Menu Operation Basics
The
MENU
,
ENTER
and
+/-
keys are used for performing
menu operations.
1 Press
the
MENU
key.
The CD player enters the menu mode, and the menu
screen is displayed in the display window.
The following are displayed in each menu screen.
Menu No. Menu item name Current setting value
Details display
2 Press
the
+/-
key to select the desired menu item.
Pressing
the
+
key displays the menu item for the next
menu No.
Pressing
the
-
key displays the menu item for the
previous menu No.
z
At this state, the menu No. blinks to indicate that the
menu item is currently selected.
z
The menu details display is scrolled immediately
after the screen is switched, and then the leading 12
characters are displayed fixed in the display window.
Not only item details but also selections are displayed
depending on the menu item (e.g. menu No. 19).
3 Press
the
ENTER
key to apply the selected menu item.
The menu No. stops blinking and stays lit.
z
The following steps (4 to 6) are not applied to menu
No. 05 (“PROG”), menu No. 21 (“A_CLR”) and the
total motor time display.
4 Press
the
+/-
key to select the desired value.
The current setting value blinks when it is changed.
5 Press
the
ENTER
key to apply the newly set value.
The value stops blinking and stays lit. When the new
settings are fixed, the menu mode automatically ends.
[
NOTE
]
• The alphabet characters of the menu item names are
displayed as follows:
• When the Remote Control Unit RC-601MKII (sold
separately) is connected and menu operations are
being performed using the RC-601MKII, all CD player
operations including menu operations are not accepted.
• Likewise, when menu operations are being performed on
the CD player, all RC-601MKII operations including menu
operations are not accepted.
CD-601MKII_Eng.indd 18
3/26/2005 7:39:51 PM
Summary of Contents for CD-601MKII
Page 1: ...CD 601MKII CD PLAYER D00811701A OWNER S MANUAL...
Page 29: ......
