TASCAM CD-9010
15
3 – Preparations
Adjusting display and indicator brightness
When the Home Screen is open, use the HOME button and
DATA dial to adjust the brightness of the display backlight and
the indicators.
You can also use the SYSTEM
menu screen
LCD BRIGHTNESS
and
LED BRIGHTNESS
items to adjust them.
NOTE
These operations only adjust the brightness and contrast of
•
the display and indicators of this unit. They do not adjust the
brightness and contrast of a connected TASCAM RC-9010/
RC-9010S remote control (sold separately).
The display and indicator BRIGHTNESS settings are retained
•
even when the power is turned OFF.
Setting using the controls
When the Home Screen is open, while pressing and holding the
HOME button, turn the DATA dial to adjust the brightness of the
unit's display and indicators.
You can also adjust the brightness of the display alone by
pressing and turning the DATA dial while pressing and holding
the HOME button.
Setting using the menu
1. Press the
MENU
button to open the
MENU
screen.
2. Open the
SYSTEM
menu.
3. Select
LCD BRIGHTNESS
or
LED BRIGHTNESS
.
4. Press the
DATA
dial to move the cursor (selected area)
right to select the value.
5.
Turn
the
DATA
dial to adjust the brightness.
LCD options:
•
0
–
7
(default value:
5
)
LED options:
•
0
–
7
(default value:
3
)
6. Press the
HOME
button to return to the Home Screen.
Connecting headphones
Connect stereo headphones to the PHONES jack on the front
panel. Use the PHONES knob to adjust the headphones output
level.
CAUTION
Before connecting headphones, use the PHONES knob to lower
the volume. Failure to do so might result in sudden loud sounds,
which could harm your hearing or result in other trouble.
NOTE
The PHONES knob can be pushed in to prevent the level from
being accidentally changed. The knob can be used when out.
The
PHONES
knob when pushed in
The
PHONES
knob when out
