TASCAM CD-9010
33
8 – Using the remote connectors
Using the serial connector
Using the REMOTE (SERIAL) connector (15-pin, D-sub, RS-232C
standard), you can control the unit using a TASCAM RC-9010/
RC-9010S remote control (sold separately), a computer or other
external device.
Use the menu to make communication-related settings.
Fader use setting
Set whether or not the use of a fader on a TASCAM RC-9010/
RC-9010S remote control (sold separately) is enabled.
1. Press the
MENU
button to open the
MENU
screen.
2. Open the
REMOTE
menu screen.
3. Select
FADER MODE
.
4. Press the
DATA
dial to move the cursor right to select the
setting.
5. Turn the
DATA
dial to enable or disable fader use.
Options:
•
ENABLE
,
DISABLE
(default value)
NOTE
When set to DISABLE, the internal fader is fixed at 0 dB.
6. After making the setting, press the
HOME
button to
return to the Home Screen.
NOTE
The fader mode setting is retained even when the power is
turned OFF.
Fader start function setting
Fader start allows playback to start by moving the fader of a
connected TASCAM RC-9010/RC-9010S remote control (sold
separately) from ∞ when the unit is in playback standby.
Enable or disable this function when fader starting is also
enabled on the remote.
1. Press the
MENU
button to open the
MENU
screen.
2. Open the
REMOTE
menu screen.
3. Select
FADER START MODE
.
4. Press the
DATA
dial to move the cursor right to select the
setting.
5. Turn the
DATA
dial to set enable or disable the fader start
function.
Options:
•
ENABLE
,
DISABLE
(default value)
6. After completing the setting, press the HOME button to
return to the Home Screen.
NOTE
The fader start mode setting is retained even when the power is
turned OFF.
Fader stop function setting
The fader stop function that allows playback to be stopped or
paused (playback standby) by moving the fader of a connected
TASCAM RC-9010/RC-9010S remote control (sold separately)
to ∞. Set whether or not this function is enabled when fader
starting in also enabled on the remote.
NOTE
If you set both the FADER START MODE and FADER STOP MODE
to DISABLE, the fader start function of the TASCAM RC-9010/
RC-9010S remote control (sold separately) will be turned OFF
automatically, and its FADER START button indicator will be unlit.
In this state, if you press the FADER START button on the remote
control, the pop-up message "Can't Change Now, Fixed in crnt
mode" appears.
1. Press the
MENU
button to open the
MENU
screen.
2. Open the
REMOTE
menu screen.
3. Select
FADER STOP MODE
.
4. Press the
DATA
dial to move the cursor right to select the
setting.
5. Turn the
DATA
dial to enable or disable the fader stop
start function.
Options:
•
ENABLE
,
DISABLE
(default value)
6. After completing the setting, press the
HOME
button to
return to the Home Screen.
NOTE
The fader stop mode setting is retained even when the power is
turned OFF.
