Tascam CD-9010, Owner'S Manual

34 

TASCAM CD-9010

8 – Using the remote connectors

Fader stop action setting

When the fader start function is ON, you can set whether using 

the fader stop function (lowering the fader to ∞) on a TASCAM 

RC-9010/RC-9010S remote control (sold separately) causes 

playback to stop or pause (playback standby). 
1.

  Press the 

MENU

 button to open the 

MENU

 screen. 

2.  Open the 

REMOTE

menu screen.

3.   Select 

FADER STOP ACT

. 

4.  Press the 

DATA

 dial to move the cursor right to select the 

setting. 

5.  Turn the 

DATA

 dial to set the action when fader stop 

occurs. 

 Options: 

• 

STOP

, 

STANDBY

 (default value) 

6.   After completing the setting, press the 

HOME

 button to 

return to the Home Screen. 

NOTE

Depending on the PLAY menu screen MONITOR PLAY STBY 

• 

item and ONLINE PLAY STBY settings, BACK CUE operation 

might take place.
The fader stop act setting is retained even when the power is 

• 

turned OFF. 

Setting the fader scale used

You can set whether to use the scale shown on the left or right 

side of the fader on a TASCAM RC-9010/RC-9010S remote control 

(sold separately). The indicator above the active scale lights. 
1.

  Press the 

MENU

 button to open the 

MENU

 screen. 

2.  Open the 

REMOTE

menu screen.

3.  Select 

FADER SCALE

. 

4.  Press the 

DATA

 dial to move the cursor right to select the 

setting. 

5.  Turn the 

DATA

 dial to set the fader scale used. 

 Options: 

• 

10dB MAX

 (left scale),  

0dB MAX

 (right scale, 

default value) 

6.   After completing the setting, press the 

HOME

 button to 

return to the Home Screen. 

NOTE

The fader scale setting is retained even when the power is turned 

OFF. 

Transmission speed setting

You can set the transmission speed (baud rate) used with a TASCAM 

RC-9010/RC-9010S remote control (sold separately) or other remote 

control using serial protocol. 

NOTE

The following serial transmission values are fixed: 8 data bits, No 

parity bit, 1 stop bit.

1.  Press the 

MENU

 button to open the 

MENU

 screen. 

2.  Open the 

REMOTE

menu screen.

3.  Select 

SERIAL BAUD RATE

. 

4.  Press the 

DATA

 dial to move the cursor right to select the 

setting. 

5.  Turn the 

DATA

 dial to set the baud rate used to 

communicate with external remotes. 

 Options: 

• 

9600bps

, 

19200bps

, 

38400bps

, 

RC

 (for TASCAM 

RC-9010/RC-9010S, default value) 

6.   After completing the setting, press the 

HOME

 button to 

return to the Home Screen. 

NOTE

The serial baud rate setting is retained even when the power is 

turned OFF.