Tascam CD-9010, Owner'S Manual

TASCAM CD-9010

 23

4 – Playback

Pitch control playback

You can modify the pitch and speed of the playback, following 

the procedures here. 

Turning pitch control playback ON/OFF

1.  Press the 

MENU

 button to open the 

MENU

 screen. 

2.  Open the 

PLAY

 menu screen.

3.  Select 

PITCH

. 

4.  Press the 

DATA

 dial to move the cursor right to select the 

setting. 

5.   Turn the 

DATA

 dial to set pitch control 

ON

 or 

OFF

 (default 

is 

OFF

).

6

.

   After completing the setting, press the 

HOME

 button to 

return to the Home Screen. 

NOTE

When you turn pitch control playback ON or OFF during 

playback, the playback sound may be momentarily interrupted. 

Setting the pitch control value

1.  Press the 

MENU

 button to open the 

MENU

 screen. 

2.  Open the 

PLAY

 menu screen.

3.  Select 

PITCH %

. 

4.  Press the 

DATA

 dial to move the cursor right to select the 

setting. 

5.   Turn the 

DATA

 dial to set the pitch control value. 

 You can set the pitch control to ±12.5% of normal. 

• 

6

.

   After completing the setting, press the 

HOME

 button to 

return to the Home Screen. 

NOTE

Even when the pitch control function is turned OFF, the pitch 

• 

control value set above is stored and will be used when the 

pitch control function is turned ON again. 
The pitch step setting is retained even when the power is 

• 

turned OFF. 

PITCH/TIME FIT function

You can adjust the time remaining of the current track to a 

defined value and play it back. 
The possible setting range corresponds to a pitch control value 

range of ±12.5%. 
This setting can be made when stopped or in playback standby. 

1.  Press the 

MENU

 button to open the 

MENU

 screen. 

2.  Open the 

PLAY

 menu screen.

3.  Select 

PITCH/TIME FIT

.

4.  Press the 

DATA

 dial to open the 

PITCH/TIME FIT

 screen. 

5.  Set the playback time as follows: 

The current track remaining time is shown initially. 

• 

Turn the 

• 

DATA

 dial to change the selected item. 

Press the 

• 

DATA

 dial to select the playback time units 

in hours, minutes and seconds order. The permissible 
range (maximum and minimum) is shown beneath the 
input line. 

6.  After completing the setting, press the 

DATA

 dial to 

confirm the setting. 

The setting is saved and reflected in the pitch control 
value, and the

PLAY

menu screen re-opens. 

7.  Press the 

HOME

 button to return to the Home Screen.