Tascam CD-9010, Owner'S Manual

32 

TASCAM CD-9010

7 – Other settings and information display

4.  Press the 

DATA

 dial to move the cursor right to select the 

setting. 

5.  Turn the 

DATA

 dial to set whether monitoring output 

muting during online playback is ON or OFF. 

• 

Options

:  

OFF

, 

ON

 (default value) 

6.   After completing the setting, press the 

HOME

 button to 

return to the Home Screen. 

NOTE

The monitor mute online setting is retained even when the power 

is turned OFF. 

Restoring the factory settings

You can restore all the settings that are stored in the unit’s 

backup memory to the values when shipped from the factory.
Follow these steps to restore the settings. 

NOTE

The factory settings cannot be restored if a CD is loaded. Remove 

the CD and conduct the operation again.

1.  Press the 

MENU

 button to open the 

MENU

 screen. 

2.  Open the 

SYSTEM

 menu.

3.  Select 

FACTORY PRESET

. 

4.  Press the 

DATA

 dial to open a confirmation pop-up 

message. 

5.  Press the DATA dial again to restore all settings to their 

factory defaults. 

COMPLETE

 appears as a pop-up message 

when done and the Home Screen automatically reopens. 

Setting the digital output format

You can set the signal format used for digital output.
Follow these steps to make the setting. 

1.  Press the 

MENU

 button to open the 

MENU

 screen. 

2.  Open the 

SYSTEM

 menu.

3.  Select 

DIGITAL OUTPUT TYPE

. 

4.  Press the 

DATA

 dial to move the cursor right to select the 

setting. 

5.  Turn the DATA dial to set the digital output format.
 

Options

: 

PRO

(default value)

, 

CONSUMER

NOTE

The digital output format setting is retained even when the 

power is turned OFF. 

Viewing media information

You can view information about the CD. 
Follow these steps to access this information. 

1.  Press the 

MENU

 button to open the 

MENU

 screen. 

2.  Open the 

INFORMATION

 menu screen.

3.  Select 

MEDIA INFO

. 

4.  Press the 

DATA

 dial to show information about the CD, 

including its used space and amount of free space. 

5.   When you are finished checking, press the 

HOME

 button 

to return to the Home Screen. 

Viewing system information

You can view information about the system. Follow these steps 

to access this information. 

1.  Press the 

MENU

 button to open the 

MENU

 screen. 

2.  Open the 

INFORMATION

 menu screen.

3.  Select 

SYSTEM INFO

. 

4.  Press the 

DATA

 dial to show the 

SYSTEM INFORMATION

screen, where you can check system versions and 
operating time. 

5.   When you are finished checking, press the 

HOME

 button 

to return to the Home Screen.