17
Basic operation
Turning the unit on or off
Press the POWER button to turn the unit on or off .
When the unit turns on, the display lights .
Check the POWER ON START switches that determine what the
unit does when the power is turned on .
When the power is turned on, and the POWER ON START
OFF-PLAY-REC (TAPE) switch for the timer is set to PLAY
or REC
or
The source set with the POWER ON START CD-TAPE-USB
switch starts playback/recording.
The timer recording can only record to cassette tape (page
35) .
When the power is turned on, and the POWER ON START
OFF-PLAY-REC (TAPE) switch for the timer is set to OFF
The source set with the POWER ON START CD-TAPE-USB
switch becomes the active source.
o
When you do not want to use the timer, be sure to set the
POWER ON START OFF-PLAY-REC (TAPE) switch to the OFF
position to prevent accidentally recording over an important
cassette tape .
Automatic power saving function
(European models only)
See “Automatic power saving function” on page 36 .
Selecting a source for playback/recording
Each time the SOURCE button is pressed, the source changes as
follows:
The selected source is shown on upper left of the display .
o
During recording, the source cannot be changed .
o
Pressing the play button for a source also selects and starts play-
back of that source .
o
Select “LINE” to use an external source connected to the LINE
connectors .
Summary of Contents for CD-A580
Page 1: ...D01310420B CD A580 CD Player Cassette Deck OWNER S MANUAL...
Page 42: ...42...
