TASCAM CD-A750 RS-232C Protocol Specifications
10
TEAC
Corporation
Command details
The commands, data, and machine IDs described here are characters (ASCII).
A command is two character bytes, a machine ID is one character byte, and each item of data is an
individual character byte.
The CD-A750 can use the following track numbers. However if a number not existing on the disc is
specified, it will be considered an invalid command.
Track number (audio CD)
maximum 99
Track number (MP3 CD)
maximum 999
CD functions
STOP
Stops the CD player of the controlled device.
Command 10
Machine ID
0
Data none
Return none
PLAY
Play starts the CD player of the controlled device.
Command
11 & 12
Machine ID
0
Data none
Return none
READY
Puts the CD player of the controlled device into the PLAY-READY mode.
Command 14
Machine ID
0
Data 2
bytes
Data 1
Data 2
Description
Remarks
0 0
Ready
Off
0 1
Ready
On
・
If data other than the above is received, the controlled device will transmit ILLEGAL [F2].
Return none
SHUTTLE
Puts the CD player of the controlled device in SHUTTLE mode.
SHUTTLE mode will be maintained until a command such as STOP, PLAY, or READY is received.
Command 16
Machine ID
0
Data 2
bytes
Data 1
Data 2
Description
Remarks
0 0
Shuttle
Forward
Shuttles in the forward direction.
0 1
Shuttle
Reverse
Shuttles in the backward direction.
・
If data other than the above is received, the controlled device will transmit ILLEGAL [F2].
Return none
TRAY/EJECT
Opens or closes the tray of the CD player of the controlled device